Curtain Walling
Leak Investigation and Remedial Works
Finding and fixing water ingress through curtain walling using inspection, water testing and targeted gasket, seal and flashing repairs.

What's involved
Curtain wall leaks are rarely where the water appears. A good investigation starts with a visual survey of gaskets, caps, silicone joints, drainage slots and interfaces with roofs and cladding. Controlled water testing, using a calibrated spray rack or hose test, is then used to isolate the exact path. Common causes include shrunken or displaced gaskets, blocked drainage paths, failed silicone at junctions, missing end dams and poorly lapped membranes at slab edges. Repairs might involve replacing gaskets, re-sealing perimeter joints, clearing drainage, or opening up sections to repair membranes. A written report with photographs is usually provided, which helps landlords and managing agents plan budgets and deal with warranty or insurance claims. Investigations typically take a day or two on site, with remedial work programmed afterwards depending on access and scope.
How we handle it
Enquiry and documents
Use the quote form to describe the building, the curtain walling scope and your programme. For new work, attach drawings or specifications; for repairs, include photos, the building height and any known system details.
Survey or design review
The contractor reviews drawings or visits site to check access, the structure, existing system and interfaces. They identify wind loads, glass requirements and any fire or movement considerations affecting design.
Quote and technical submission
You receive a written quotation. For new installations, fabrication drawings, structural calculations and product data are submitted for approval before materials are ordered.
Fabrication and installation
Frames, units and glass are fabricated and delivered in sequence. Installation follows an agreed programme with quality checks, and water testing on sample areas where specified.
Completion and records
The contractor completes snagging, cleans down and hands over operation and maintenance information, including system details, glass specification and recommended maintenance intervals.
Price guide
Curtain walling is usually priced per square metre for new work, and per unit or per day for reglazing and maintenance. Cost depends on system type, glass performance, building height, access and complexity of interfaces. Unitised systems cost more to design and make but save site time. These are typical UK guide prices.
- Stick system curtain walling: £450–£850 per m². Supply and install, double glazed, typical low to mid-rise commercial building.
- Planned maintenance inspection: from £600. Per visit for a small building, larger facades priced on area and access.
- Leak investigation and water test: £750–£2,500. Survey, controlled water testing and written report, excluding access equipment.
Questions about leak investigation and remedial works
What is curtain walling?
Curtain walling is an outer wall system, usually aluminium framing with glass or panels, that is attached to a building's structure but does not carry floor or roof loads. It resists wind and keeps out weather while letting in light. It is common on offices, shops, schools and apartment blocks.
How much does curtain walling cost per square metre?
Stick system curtain walling typically costs £450–£850 per square metre installed, and unitised systems £700–£1,300 per square metre. Price depends on glass specification, building height, access, design complexity and volume. Low-rise capped systems can start from around £400 per square metre.
What access is needed to repair curtain walling?
Access depends on height and location. Low-level work can use towers or MEWPs, while higher elevations may need building maintenance cradles, rope access or scaffolding. Unitised panels on tall buildings may be replaced from inside using lifting equipment. Access often accounts for a large share of repair costs.
Other services
Stick System Curtain Walling
Site-assembled aluminium mullion and transom curtain walling for low to mid-rise buildings, glazed and sealed floor by floor.
Unitised Curtain Walling
Factory-built, pre-glazed facade panels lifted into place, ideal for tall buildings, tight programmes and consistent quality.
Shopfront and Low-Rise Facade Glazing
Capped and structurally glazed curtain walling for shopfronts, showrooms, reception areas and low-rise commercial frontages.
Curtain Wall Reglazing
Replacing failed, misted, cracked or damaged glass units within existing curtain walling, including high-level and structural glazing.
Planned Maintenance and Inspection
Scheduled inspection, cleaning of drainage, gasket checks and minor repairs to keep curtain walling watertight and extend its life.
Leak Investigation and Remedial Works near you
Get a free curtain walling quote
Tell us what you need and we'll come back with a clear price.
Request a quote