Curtain Walling
Stick System Curtain Walling
Site-assembled aluminium mullion and transom curtain walling for low to mid-rise buildings, glazed and sealed floor by floor.

What's involved
Stick systems are built on site from long vertical mullions and horizontal transoms. Brackets are first fixed to the slab edges or steel frame, set out to tight tolerances using lasers. Mullions are hung from these brackets with slotted connections that allow for building movement and thermal expansion, then transoms are fitted between them. Glass units or insulated panels are set on setting blocks, held by pressure plates and covered by snap-on caps, with EPDM gaskets forming the weather seal. Drainage and pressure equalisation paths let any water that gets past the outer seal escape safely. Installation is typically done from scaffolding, mast climbers or MEWPs. A stick system is usually more economical on smaller or irregular elevations. The main contractor needs to provide clear access, slab edges within tolerance and a programme for following trades.
How we handle it
Enquiry and documents
Use the quote form to describe the building, the curtain walling scope and your programme. For new work, attach drawings or specifications; for repairs, include photos, the building height and any known system details.
Survey or design review
The contractor reviews drawings or visits site to check access, the structure, existing system and interfaces. They identify wind loads, glass requirements and any fire or movement considerations affecting design.
Quote and technical submission
You receive a written quotation. For new installations, fabrication drawings, structural calculations and product data are submitted for approval before materials are ordered.
Fabrication and installation
Frames, units and glass are fabricated and delivered in sequence. Installation follows an agreed programme with quality checks, and water testing on sample areas where specified.
Completion and records
The contractor completes snagging, cleans down and hands over operation and maintenance information, including system details, glass specification and recommended maintenance intervals.
Price guide
Curtain walling is usually priced per square metre for new work, and per unit or per day for reglazing and maintenance. Cost depends on system type, glass performance, building height, access and complexity of interfaces. Unitised systems cost more to design and make but save site time. These are typical UK guide prices.
- Stick system curtain walling: £450–£850 per m². Supply and install, double glazed, typical low to mid-rise commercial building.
- Planned maintenance inspection: from £600. Per visit for a small building, larger facades priced on area and access.
- Leak investigation and water test: £750–£2,500. Survey, controlled water testing and written report, excluding access equipment.
Questions about stick system curtain walling
What is curtain walling?
Curtain walling is an outer wall system, usually aluminium framing with glass or panels, that is attached to a building's structure but does not carry floor or roof loads. It resists wind and keeps out weather while letting in light. It is common on offices, shops, schools and apartment blocks.
What is the difference between stick and unitised curtain walling?
Stick curtain walling is assembled on site from individual mullions, transoms and glass, which suits smaller or irregular buildings. Unitised curtain walling is made as complete panels in a factory and lifted into place, which suits taller buildings and tight programmes. Unitised systems cost more to design and make but need less site labour.
How long does curtain walling last?
Well-installed aluminium curtain walling can last 40 years or more, although glass units, gaskets and silicone seals usually need replacing sooner, often after 20 to 30 years. Regular inspection, clearing drainage and replacing failed seals early all help extend the system's life.
Other services
Unitised Curtain Walling
Factory-built, pre-glazed facade panels lifted into place, ideal for tall buildings, tight programmes and consistent quality.
Shopfront and Low-Rise Facade Glazing
Capped and structurally glazed curtain walling for shopfronts, showrooms, reception areas and low-rise commercial frontages.
Curtain Wall Reglazing
Replacing failed, misted, cracked or damaged glass units within existing curtain walling, including high-level and structural glazing.
Leak Investigation and Remedial Works
Finding and fixing water ingress through curtain walling using inspection, water testing and targeted gasket, seal and flashing repairs.
Planned Maintenance and Inspection
Scheduled inspection, cleaning of drainage, gasket checks and minor repairs to keep curtain walling watertight and extend its life.
Stick System Curtain Walling near you
Get a free curtain walling quote
Tell us what you need and we'll come back with a clear price.
Request a quote