Curtain Walling

Curtain Walling

Shopfront and Low-Rise Facade Glazing

Capped and structurally glazed curtain walling for shopfronts, showrooms, reception areas and low-rise commercial frontages.

Free Curtain Walling quote

No obligation. We only use your details to reply about this job.

Shopfront and Low-Rise Facade Glazing — Curtain Walling

What's involved

Many smaller projects use curtain walling across one or two storeys, such as car showrooms, retail parks, school entrances and office receptions. Capped systems show a visible pressure cap on the outside, while structurally glazed systems bond glass to the frame with silicone for a flush, all-glass look. The contractor surveys the opening, confirms the wind load and glass specification, and integrates doors, vents and blinds into the framing. Glazing is often laminated or toughened to meet safety glazing needs at low level. Interfaces with brickwork, cladding and roofs are detailed with membranes and flashings to keep water out. Low-rise elevations can often be installed in a few days to two weeks from towers or MEWPs. Allow for door hardware, access control and signage at the design stage to avoid costly changes later.

How we handle it

  1. Enquiry and documents

    Use the quote form to describe the building, the curtain walling scope and your programme. For new work, attach drawings or specifications; for repairs, include photos, the building height and any known system details.

  2. Survey or design review

    The contractor reviews drawings or visits site to check access, the structure, existing system and interfaces. They identify wind loads, glass requirements and any fire or movement considerations affecting design.

  3. Quote and technical submission

    You receive a written quotation. For new installations, fabrication drawings, structural calculations and product data are submitted for approval before materials are ordered.

  4. Fabrication and installation

    Frames, units and glass are fabricated and delivered in sequence. Installation follows an agreed programme with quality checks, and water testing on sample areas where specified.

  5. Completion and records

    The contractor completes snagging, cleans down and hands over operation and maintenance information, including system details, glass specification and recommended maintenance intervals.

Price guide

Curtain walling is usually priced per square metre for new work, and per unit or per day for reglazing and maintenance. Cost depends on system type, glass performance, building height, access and complexity of interfaces. Unitised systems cost more to design and make but save site time. These are typical UK guide prices.

  • Stick system curtain walling: £450–£850 per m². Supply and install, double glazed, typical low to mid-rise commercial building.
  • Planned maintenance inspection: from £600. Per visit for a small building, larger facades priced on area and access.
  • Leak investigation and water test: £750–£2,500. Survey, controlled water testing and written report, excluding access equipment.

Questions about shopfront and low-rise facade glazing

What is structural glazing?

Structural glazing is a form of curtain walling where glass is bonded to the frame using structural silicone, instead of being held by external pressure plates and caps. It gives a flush, all-glass appearance. It needs careful design, specialist installation and controlled curing of the silicone.

Get a free curtain walling quote

Tell us what you need and we'll come back with a clear price.

Request a quote