Curtain Walling

Curtain Walling guides

Practical, plain-English guides to costs, rules and getting the job done right.

How Much Does Curtain Walling Cost per m² in the UK? 2026 Guide

In the UK in 2026, stick system curtain walling typically costs £450–£850 per m² supplied and installed, and unitised curtain walling £700–£1,300 per m². Low-rise shopfront systems start from £400 per m². Reglazing a single unit costs £600–£2,500, leak investigation with water testing £750–£2,500, and a planned maintenance inspection from £600. Specification, height, access and volume drive the final figure.

Read the guide →

Stick vs Unitised Curtain Walling: Differences, Pros and Cons

Stick curtain walling is assembled on site from mullions, transoms and glass, costing about £450–£850 per m². It suits low to mid-rise buildings, complex shapes and smaller areas. Unitised curtain walling is built and glazed as panels in a factory and lifted into place, costing about £700–£1,300 per m². It suits tall buildings, fast programmes and repetitive facades where factory quality control matters.

Read the guide →

Curtain Wall Leaks: How to Find and Fix Water Ingress

Most curtain wall leaks come from failed or displaced gaskets, blocked drainage in transoms, poor seals at junctions with the roof, slabs or other cladding, and damaged or poorly fitted glass units. A specialist traces the source with inspection and controlled water testing, typically costing £750–£2,500 plus access, then carries out targeted repairs such as resealing, gasket replacement, drainage clearing or reglazing.

Read the guide →

Curtain Walling Regulations UK: Standards, Fire and Building Safety

Curtain walling in the UK is covered by the product standard BS EN 13830, which sets performance characteristics such as air permeability, watertightness and wind resistance. In England, Regulation 7(2) restricts materials in external walls of relevant buildings at least 18 metres high. Higher-risk buildings go through the Building Safety Regulator under the Building Safety Act 2022. CDM 2015 and the Work at Height Regulations 2005 apply to installation and maintenance.

Read the guide →

Curtain Walling Maintenance: Inspection Checklist and Costs

Curtain walling needs regular inspection and maintenance to stay watertight and safe. A typical programme includes cleaning glass and frames, clearing drainage slots, checking gaskets, sealants and pressure plates, inspecting glass for damage or failed seals, and checking opening vents and doors. Planned inspections start from around £600 per visit for a small building, with larger facades priced on area and access.

Read the guide →

Curtain Walling glossary →

Get a free curtain walling quote

Tell us what you need and we'll come back with a clear price.

Request a quote