Guide · Building owners · 3 min read · Updated 17 November 2026
Curtain Walling Maintenance: Inspection Checklist and Costs
Short answer
Curtain walling needs regular inspection and maintenance to stay watertight and safe. A typical programme includes cleaning glass and frames, clearing drainage slots, checking gaskets, sealants and pressure plates, inspecting glass for damage or failed seals, and checking opening vents and doors. Planned inspections start from around £600 per visit for a small building, with larger facades priced on area and access.
Why maintenance matters
Curtain walling is often treated as maintenance-free, but it is a complex system of aluminium, glass, gaskets, sealants and drainage. Over time, gaskets age and shrink, sealants weather, drainage paths clog and glass units can fail. Without maintenance, small defects can turn into leaks, damage to internal finishes, condensation problems and expensive remedial work.
Regular inspection and maintenance also support safety. Loose caps, damaged glass or failing fixings can create hazards at height. Keeping the facade in good order protects occupants, the public below and the value of the building, and makes it easier to plan larger works such as reglazing or gasket replacement in a controlled way.
Inspection checklist
A maintenance inspection should cover the whole system, inside and out, with particular attention to areas with a history of problems or exposure to driving rain. The checklist below covers the main items most specialists look at.
- Glass: cracks, chips, failed seals, misting, delamination and movement
- Gaskets: shrinkage, hardening, gaps at corners and displacement
- Sealants: cracking, adhesion loss and weathering
- Pressure plates and caps: security and damage
- Drainage: slots and weep holes clear of debris
- Opening vents and doors: operation, seals, hinges and locks
- Junctions with roof, ground, slabs and other cladding
- Signs of water staining or condensation inside
Typical maintenance tasks and frequency
The right frequency depends on the building's exposure, height, use and condition. Many owners combine some checks with routine window cleaning and carry out a more detailed specialist inspection less often. The table gives a general guide to typical tasks. Manufacturers' and system suppliers' guidance should also be followed where available.
| Task | Typical frequency | Who usually does it |
|---|---|---|
| Cleaning glass and frames | Regularly, often several times a year | Window cleaning contractor |
| Clearing drainage and weep slots | At least yearly | Facade maintenance specialist |
| Gasket and sealant inspection | Yearly or as advised | Facade maintenance specialist |
| Opening vents and doors service | Yearly | Specialist or door engineer |
| Detailed facade survey | Every few years | Facade consultant or specialist |
Cleaning without causing damage
Regular cleaning keeps glass looking good and lets problems be spotted early, but poor cleaning can cause damage. Harsh chemicals can attack gaskets, sealants and powder coatings. Abrasive tools can scratch glass and coatings. High-pressure washing can force water past seals and into the building. Cleaning contractors should follow the system supplier's guidance on suitable methods and products.
Brief your cleaning contractor to report any damage or defects they see, such as cracked glass, loose caps or gaskets hanging out. They often see more of the facade than anyone else, and early reporting allows repairs before problems worsen. Make sure cleaning access equipment does not damage the facade or block drainage.
Common repairs found during maintenance
Many maintenance visits find small issues that are quick to fix. Clearing blocked drainage, reseating displaced gaskets, tightening loose pressure plates and replacing damaged caps are common. Opening vents often need adjustment, new seals or replacement hinges. Small areas of failed sealant can be cut out and replaced with compatible material.
Larger issues may need separate planning. Failed glass units need reglazing, typically costing £600–£2,500 per unit. Widespread gasket failure on an elevation may justify a planned replacement programme. Recurring leaks may need a full investigation with water testing, typically £750–£2,500 plus access. Maintenance reports help budget for these works.
Access, safety and records
Access is often the biggest practical challenge in facade maintenance. Some buildings have permanent cradle systems or anchor points for rope access. Others need mobile elevating work platforms, scaffold or towers. Work at height must be planned and carried out safely under the Work at Height Regulations 2005, and maintenance contractors should provide risk assessments and method statements.
Keep a facade maintenance log with inspection reports, photos, repairs, glass replacements and water test results. Include the system name, glass specifications and drawings if you have them. Good records speed up future work, help with insurance and sales, and, for higher-risk buildings in England, form part of the information building owners are expected to keep.
Planning for the long term
Curtain walling components age at different rates. The aluminium framing and powder coating usually last much longer than the gaskets, sealants and sealed glass units, which will need renewing at intervals during the life of the building. Building owners who plan for this, with a facade lifecycle plan and a budget for reglazing and gasket renewal, avoid sudden large bills and reduce disruption to occupants.
A detailed facade survey every few years gives the information needed for that plan. It records the condition of each elevation, the number of failed or failing glass units, the state of gaskets and sealants and any recurring leak areas. From that, a specialist can suggest which works should happen soon, which can wait and roughly what they will cost. Grouping work by elevation, and timing it with other access such as roof works or redecoration, often brings costs down. For older facades with widespread problems, the survey may also consider whether refurbishment, overcladding or replacement offers better long-term value.
Questions people also ask
How often should curtain walling be inspected?
Many buildings benefit from a specialist inspection at least once a year, with drainage cleared and gaskets checked, alongside regular cleaning. Exposed, tall or older facades may need more frequent checks. A detailed survey every few years helps plan larger works such as reglazing or gasket replacement.
Do curtain wall gaskets need replacing?
Over time, yes. Gaskets age, harden and shrink, especially on sunny or exposed elevations, which can open gaps and cause leaks. Inspections identify when gaskets are deteriorating. Localised replacement or reseating is often enough, but widespread failure may justify replacing gaskets across an elevation.
How much does curtain wall maintenance cost?
Planned maintenance inspections start from around £600 per visit for a small building. Larger facades are priced on area and access. Repairs such as reglazing, gasket replacement or leak investigations are priced separately, and access equipment can be a significant part of the cost on tall buildings.
Written and checked by the Curtain Walling team. Read our editorial policy.
More guides
How Much Does Curtain Walling Cost per m² in the UK? 2026 Guide
In the UK in 2026, stick system curtain walling typically costs £450–£850 per m² supplied and installed, and unitised curtain walling £700–£1,300 per…
Stick vs Unitised Curtain Walling: Differences, Pros and Cons
Stick curtain walling is assembled on site from mullions, transoms and glass, costing about £450–£850 per m². It suits low to mid-rise buildings,…
Curtain Wall Leaks: How to Find and Fix Water Ingress
Most curtain wall leaks come from failed or displaced gaskets, blocked drainage in transoms, poor seals at junctions with the roof, slabs or other…
Curtain Walling Regulations UK: Standards, Fire and Building Safety
Curtain walling in the UK is covered by the product standard BS EN 13830, which sets performance characteristics such as air permeability,…
Get a free curtain walling quote
Tell us what you need and we'll come back with a clear price.
Request a quote